4
EN
• Other characteristics of the operating environment (mechanical stress
- shocks and vibrations, occurrence of plants, animals, weather conditions)
are negligible in terms of their effect on the correct and safe use of
electrical device.
1.3 Electrical safety
• Before connecting the device to the mains for the first time, make sure that
the mains voltage indicated on the device label corresponds to the mains
voltage of the household.
• The electrical device is determined
Power supply: 1/N/PE 230V ~ 50Hz.
The electrical safety of the device is guaranteed only if it is correctly
connected to the mains.
• Use only the power cord with the plug (power cord) supplied with the
device and compatible with the wall socket. Using a different cable may
result in fire or electric shock.
• Always connect the device to an easily accessible power socket. In
the event of an operating fault, the device must be switched off and
disconnected from the mains as soon as possible.
• Do not unplug the power cable / cord by pulling on the cable / cord.
Disconnect the power cord by pulling the plug on the power cable / power
cord.
• If you use an extension cord, make sure that the total rating (ampere) of all
devices connected to the extension cord does not exceed the maximum
current rating of the extension cord.
• If you must use an extension power cord or power block, ensure that the
extension power cord or power block is plugged into an electrical socket,
and not to another extension power cord or power block. The extension
cord or power block must be for grounded plugs and plugged into a
grounded socket.
• The mains plug of the device must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
improper and damaged sockets.
• To avoid electrical shock, plug the equipment power cables into properly
grounded electrical sockets. If your device is equipped with a 3-pin power
cord, do not use adapters that do not have a grounding element, or
remove the grounding element from the plug or adapter.
• Do not bend, crush, or otherwise expose the appliance‘s power cord /
power cord to mechanical stress or external heat sources. Damage to the
power cord can result in electric shock.
• If the power cord is damaged, unplug the device and do not use it again. If
the power cable / power cord is damaged, it must be replaced by
the manufacturer, its service center, or a qualified person to avoid the risk
of electric shock.