31
EN
Book Manage
The “Manage Files” item allows you to view an overview of the timer recording settings,
make timer recording settings, and make adjustments
in scheduled uploads.
Press
v
/
V
to highlight “File Management” and press OK.
You will see an overview of the scheduled recordings you have set. If no events
are scheduled (timer recording / arming), the list is empty. If any events are already
scheduled, a list of scheduled events is displayed in the list.
Use the colored buttons to perform the appropriate functions in the list. The functions of
the colored buttons are described in the bottom bar.
Set to the desired event in the list.
The red (Recording) button for the event changes whether recording will be performed
(Yes) or only the set program will be displayed (No).
Press the green button (Setup) to activate or deactivate the event (the alarm icon is
displayed or turned off).
Use the yellow (Edit) button to edit the selected event. You’ll see a table for the event
where you can make edits.
The blue button (Settings) allows you to set a new timed event. In the Timer Setup
window that appears, you set Repeat (Off / Once), Channel, Wake Date (Event
Execution Date), Start Time (Event Execution Start Time), End Time, and Mode (View -
View Selected Program Only or Record - Record Selected Program).
To record, a USB storage device with suffi cient free space must be connected to the
USB connector.
After entering all parameters, select Save and press OK to save the event, or select
Cancel and press OK if you do not want to save the event.
The event is added to the Timer Settings table and performed at the set time.
You can select an event in the table at any time and edit any parameter by pressing the
yellow (Edit) button in the Timer Setting window that appears.
OSD Setting
“OSD Settings” allows you to change various OSD settings.
Press
v
/
V
to select “OSD Setting” and press OK.
The following submenu appears.