4
EN
• The basic IPX0 protection class (when the device is not protected by
its waterproof cover) is not marked on the product and in the technical
parameters listed in the operating instructions.
• If the protection class of the product is different from IPX0, this information
is then displayed on the label of the appliance or in the technical data of
the operating instructions.
• The appliance is not primarily intended for use in environments with
significant water effects.
Safety of persons
• This device may be used by children under the age of 8 and persons with
reduced physical, sensory or mental capabilities or lack of experience or
knowledge when supervised or instructed to use the appliance safely and
understand the dangers involved.
• This appliance can also be used by small children (children between
the ages of 3 and 8) if the controls are set by their parent or authorized
guardian, or if the child has been instructed enough to operate the
controls safely.
• Children may not play with the device.
• Cleaning and maintenance for users may not be performed by children
unattended.
Cleaning, maintenance and repairs
• Perform the normal user cleaning and maintenance of the electrical
equipment only as recommended. Do not use chemical solvents or
abrasive cleaners for cleaning.
• Never clean the appliance in a way that could cause it to dampen and drip
into the device.
• Clean the device with a damp cloth only and wipe dry or let it dry.
• Keep the appliance clean and dry.
• Do not disassemble the electrical/electronic equipment!
• Never repair the electrical / electronic equipment yourself!
Special Safety Instructions and cautions
• When transporting , be careful when moving, to avoid equipment fall and
damage.
• Unpack the equipment and accessories before putting it into service and
remove all parts of packaging material and labels. Store the packaging in
a safe place, especially out of the reach of children and unaccompanied
persons, or dispose of them safely.
• If the device was stored at low temperatures (eg in winter) or excessive
humidity, first leave it for about 1 hour to “acclimatize” to remove any
moisture in electronic parts that occurs when the ambient temperature
changes.
