Soundbar Operation
Connections
Mounting the Soundbar
For mounting the soundbar to a wall, you may need a drill, a marker pen or
pencil, a bubble level, two screws, and two drywall anchors (optional).
1. Locate a place for mounting the soundbar. Make sure you have enough room
for both ends of the sound bar to present unobstructed sound transmission.
2. Use the supplied mounting template to mark two screw hole positions. Use two
screws (not supplied) with heads no bigger than the sound bar’s mounting holes.
3. Align the soundbar’s mounting holes with the screw heads and slide down to
secure the soundbar.
To wall mount the soundbar with an Astralvision Touchscreen, use the standard
mount brackets, and then connect the soundbar to the touchscreen using the
3.5mm cable included.
To mount the soundbar to an ABI mobile stand, use the soundbar plate supplied
with the mobile stand.
After you connect the AC adapter, the soundbar enters standby mode.
1. Turn on your device and turn down its volume.
2. Press to turn on the soundbar, and turn down its Volume.
3. Press LINE or AUX or BT or FM on the remote to switch to LINE or AUX mode
or BT mode or FM Radio mode.
4. After starting playback on your device, adjust the device and soundbar volume
to a comfortable level.
Note:
The sound bar enters standby mode if you pause it for more than 15 minutes.
Main On/Off Switch
AUX In (for Line In audio
from DVD, PC, etc)
TV Aerial cable. Unwind &
keep straight if using FM
radio (attach to back of
soundbar)
Connection
socket for
Power adapter
Line In audio for
“Headphone” (ampli
fi
ed)
signal (from Smartphone,
Notebook, TV, Tablet, etc).
USB Port (plays MP3 audio)
Micro SD card port (plays
MP3 audio)
Play/Pause
Short Press for Previous Track (MP3)
Long Press for Volume -
InfraRed Remote
Receiver
Short Press for Next Track (MP3)
Long Press for
Press to Select &
Pair Bluetooth
Power On/Off
Source Switching (Bluetooth,
USB, FM Radio, Aux In)
Display
Output to Bass
(Sub Woofer)
