Important Safety Instructions
1. Read & follow these instructions. Keep these instructions as a reference.
2. Heed all warnings.
3. The power source must supply 16V DC. Its centre tip must be set to positive
and its plug must
fi
t the DC IN jack. Using an adapter that does not meet
these speci
fi
cations could damage the soundbar or adapter. Use the power
adapter supplied.
4. Do not use soundbar near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
7. Do not install near any heat sources such as radiators,heat outlets,stoves, or
other apparatus including ampli
fi
ers, that produce heat.
8. Use only attachments/accessories speci
fi
ed by the manufacturer.
9. Protect the power adapter cord from being walked on or pinched, particularly
at plugs and the point where they exit the soundbar.
10. Unplug soundbar during lightning storms or when unused for long
periods of time.
11. Refer all servicing to quali
fi
ed service personnel. Servicing is required when
the soundbar has been damaged in any way, such as if the power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the soundbar, it has been exposed to rain or moisture, it does not operate
normally, or it has been dropped.
Warnings and Precautions
•
To reduce the risk of electric shock, do not remove cover (or back). There
are no user serviceable parts inside.
•
Do not expose the soundbar to dripping or splashing liquids. Do not place
objects
fi
lled with liquids (such as vases) on the soundbar.
•
The power adapter plug is used as the disconnect device. It shall remain
readily operable and should not be obstructed during intended use. To
completely disconnect the soundbar from supply mains, the power adapter
plug of the product shall be disconnected from the mains socket outlet
completely.
•
Using the soundbar near
fl
uorescent lighting may cause interference with
the remote. If the soundbar is behaving erratically, move away from any
fl
uorescent lighting.
Remote Control Instructions
Problem
Solution
No Sound
Make sure the AC adapter is plugged into a working outlet
and
fi
rmly connected to the sound bar.
Check the connection of your device to the sound bar.
Distorted sound
Check your source device to see if it is causing the distortion.
Set the device and the sound bar volume to a lower level.
Unbalanced sound
If the volume remains low even then the soundbar’s volume
is turned all the way up, check the source device to make
sure it is connected via a variable output. Make sure the
output is not turned down too low.
Troubleshooting
3D Sound Mode
Power/Standby
Bluetooth Input Selector
OPTIC not functioning
MP3 (USB/SD) Input Selector
Play/Pause for MP3;
Auto Memory for FM
Movie Sound Mode
BASS +
BASS -
TREBLE - VOLUME -
Music Sound Mode
Previous Track (MP3), FM CH -
Next Track (MP3), FM CH +
FM Radio Selector
Line In (3.5mm) Selector
AUX In (RCA) Selector
Mute On/Off
Voice Sound Mode
