Orascoptic Telescopes, Руководство пользователя

Страница: 10 / 11

Cleaning And Refurbishing Service
When your frame and telescopes need cleaning and refurbishing, call to arrange for timely
service. See back of manual. Optical lab technicians will clean your telescopes and frame, and
replace worn-out screws, nosepad, temple tips and headstrap. Your telescopes will look like new!
9
OPERATING INSTRUCTIONS
Orascoptic
®
Telescopes
If you have purchased a loupe with laser filters, please note the following:
The human eye is extremely sensitive to laser radiation. THE FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN BLINDNESS OR OTHER SEVERE AND
PERMANENT DAMAGE TO YOUR EYES.
1. INSPECT YOUR LASER LOUPES FOR DAMAGE AND FIT BEFORE EACH USE.
Scratched, cracked, or loose fitting loupes may permit the laser beam to reach the eye
directly and should not be used.
2. ENSURE THE WAVELENGTH IMPRINTED ON YOUR LASER LOUPES MATCHES
THE WAVELENGTH OF THE BEAM BEING TRANSMITTED BY THE LASER YOU
ARE OPERATING.
Each wavelength requires a different type of protective eyewear. If the
wavelength at which your laser operates is not the same as the wavelength imprinted on
your Laser Loupes, you must select different eyewear protection, as your Laser Loupes will
not provide any protection to your eyes.
3. NEVER LOOK DIRECTLY INTO A LASER BEAM EVEN WHEN WEARING YOUR
LASER LOUPES.
Your Laser Loupes are designed to only protect against incidental
exposure from stray or diffused reflection of the laser beam’s energy.
4. YOUR LASER LOUPES MUST BE WORN AT ALL TIMES WHILE OPERATING YOUR
LASER.
Laser Loupe Safety Instructions
Kerr Corporation continuously improves its products as a result of customer feedback. At time of
shipment, products may reflect improvements in appearance and function.
U.S. Technical Support: 800-369-3698
Outside the U.S. Call Your Local Distributor