
4
5
- Insert the EtCO2 Sensor connector into the receptacle of the
host monitor.
- Choose the appropriate airway adapter and connect it to the
sensor head. The airway adapter clicks into place when seated
correctly (See figure 1).
- Set the sensor to zero.
- Install the airway adapter at the proximal end of the circuit
between the elbow and the ventilator Y-section (see figure 2).
Figure 1 Figure 2
• External Sidestream EtCO2 Sensor
- Insert the EtCO2 Sensor connector into the receptacle of the
host monitor.