background image

 Manual for Tire Pressure Monitoring Systems, TPMS 

 

19/21                                           

WARRANTY POLICY

 

We warrant our products for one year (365 days) from the date of original purchase to be free 
from defects in materials and workmanship. If, during this period, the product fails under normal 
usage, because of a manufacturing defect, we will replace or repair the item. To obtain repair or 
replacement under the terms of this warranty, please return the product to the place of purchase. 
Proof of purchase and date of purchase are required to validate the warranty claim. 
 
All implied warranties, including the warranty of merchantability, are limited to this same ninety-
day period from date of original purchase. We are not liable for any direct or consequential loss or 
property damage arising from any use of this product. This warranty gives you specific legal rights, 
and you may also have other rights, which vary from state to state.  
This does not affect your statutory rights. 

 

Note: Warr

anty including “Wireless Display Unit and Wireless Transmitter Sensor and Power 

Connection cable”, not including other accessories. 

 

When remove transmitter sensors to different tires and replace new transmitter sensors, 
suggest changing all the valve steams and screws. 

 
 

Warning  

 
1. 

Only use TPMS sensor replacement parts (these can be purchased from Agents).  
TPMS cannot use other brands of TPMS sensors for replacement parts. Using other 
brands will be cause failure and will void the warranty. 

 
2. 

The power connection is NOT COMPATABLE with USB interface; please do not plug 
in any USB devices. 

 
 
 

Any questions pertaining to warranty information or other questions not answered in the 
preceding pages can be answered by the place of purchase or by Orange Electronic service e-
mail address: 

 
 
 
[email protected] 
 
 
 
 
 

For updated TPMS information and Orange products visit the Orange Electronic website: 

www.orange-electronic.com

 

 

 
 
 
 
 
 
 
 
 
 
 

Thank you for your purchase and enjoy your TPMS! 

Содержание P451






















Отзывы: