Manual for Tire Pressure Monitoring Systems, TPMS
14/21
RESET FOR TIRE CHANGES AND ROTATION
The rotation is necessary to prolong the life of your tires. The system can reset the tire position to
ensure the transmitter sensor can indicate the right position of your tires on display unit. TPMS
provides three modes of tire rotation methods and one mode for random repositioning and single
sensor replacement.
The product has adopted
Orange Tire Orientation (OTO)
.
The system will automatically reset tire position on driving for a while after tire or sensor change,
and it can efficiently help end user save time for resetting.
There are two modes if drivers would like to operate it manually.
Mode 1 :
Four Sensor Replaced
Mode 2 :
Single Sensor Replaced
Warming
1. Do not turn off the vehicles power during this process. Doing so will immediately
interrupt the repositioning setup process. The ignition can either be in the on or start
position.
2. After repositioning, check the display is detecting all tire pressures correctly. If the
system cannot work normally, please reset it and follow the instructions again (At this
time, enter Mode 2 to use single sensor replaced).
No.1 → Front Right Tire
No.2 → Rear Right Tire
No.3 → Rear Left Tire
No.4 → Front Left Tire
No.1
No.2
No.4
No.3
