Manual for Tire Pressure Monitoring Systems, TPMS
4/22
Accessories for Tire Pressure Monitoring System
NO.
Accessory Name
Quantity
A
Wireless Receiver and Display Unit
1
B
Velcro for Display
1 set
C
Power Connection for Cigarette Lighter
1
D
Wireless Transmitter Sensor with Valve Stem
4
E
Valve Nut
4
F
Nut for stand
1
G
Base (for display unit)
1
H
Windshield holder
1
I
3M Double-Coated Adhesive
1
Caution: the power connection is NOT COMPATABLE with USB interface; please do not plug
in any USB devices.
Display Unit Installation
1. Plug in one side of C the power cable connection into A the display located on the side.
2. Connect the power cable into the
vehicle’s cigarette lighter socket for power connection.
(or cut the cigar jet. plug the power cable with ACC, Positive, Negative into fuse box)
Note: Plugging the power cable with ACC, Positive, Negative into fuse box, the LED light will
turn on only when ACC is on and the LED light will be off when ACC is turned off.
3. Install the display unit in front of driver at an appropriate position.
Stick the Velcro B into the bottom of the display unit A, and Stick the unit into the
convenient place.
4. After set up the monitor please take off the protection film from the panel of monitor.
Installing steps:
Step1: Take off white film of Velcro (B) and adhere to Base (G). Adhere the other Velcro (B) to
the back of the Wireless Receiver and Display Unit.
Step2: Screw Nut for stand (F) to the Base (G).
Step3: Attach the head of base (G) to the windshield holder, and screw the nut tightly.
Step4: Use any side of 3M double-coated Adhesive (I) to windshield holder, another side is
adhered to windshield.
3M
double-coated
adhesive
Velcro
Base
(for Display Unit)
Windshield holder
