13
Pressure sensor
If you put excessive pressure on your teeth, the
red pressure sensor light (b) will light up (picture 3,
page 5). Additionally, when brushing in «Daily
Clean» or «Deep Clean» mode, the brushing mode
will change to the «Sensitive» mode. Periodically
check the operation of the pressure sensor by
pressing moderately on the brush head during use.
Brushing modes
Your toothbrush offers different brushing modes:
«Daily Clean»
– Standard mode for daily
mouth cleaning
«Deep Clean»
– Mouth cleaning with
extended brushing time of
45 seconds per quadrant
(3 minute total brushing time)
«Sensitive»
– Gentle, yet thorough
cleaning for sensitive areas
«Whitening»
– Polishing for occasional or
everyday use
«Massage»
– Gentle massage of gums
Your toothbrush automatically starts in the «Daily
Clean» mode. To switch to the other modes, succes-
sively press the mode button (picture 4, page 5).
To return from any mode back to the «Daily Clean»
mode, press and hold the mode button. The brush-
ing mode is memorized even when the handle is
briefly switched off during brushing. When pausing
longer than 30 seconds or briefly pressing the mode
button (d) during pause the brushing mode res ets to
the «Daily Clean» mode.
Brush heads
Oral-B offers you a variety of different brush heads
that fit your Oral-B Triumph toothbrush.
Oral-B FlossAction brush head
features micropulse bristles that allow
for an outstanding plaque removal in
the interdental areas.
Oral-B Precision Clean
cups each tooth with a curved bristle
trim and reaches deep between teeth
at the same time.
Oral-B Sensitive brush head
features an extra soft bristle structure
that is gentle on teeth and gums.
Oral-B 3DWhite brush head
features a special polishing cup to
naturally whiten your teeth. Please
note that children under 12 years old
should not use the Oral-B 3DWhite
brush head.
All brush heads feature light blue INDICATOR
®
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day for
two minutes, the blue color will fade halfway down
approximately in a 3-month period. If the bristles
splay before the colour recedes, you may exert too
much pressure on teeth and gums.
We do not recommend using the Oral-B FlossAction
or Oral-B 3DWhite brush head with braces. You
may use the Oral-B Ortho brush head, specifically
designed to clean around braces and wires.
Synchronizing your
toothbrush
To avoid interference of display messages when
using more than one Oral-B Triumph toothbrush
with SmartGuide in the same household, you
need to assign the handles to their respective
SmartGuide.
You can synchronize a maximum of 2 handles with
one SmartGuide. To do so, push the «h/min» button
in the battery compartment for at least 3 seconds.
The SmartGuide shows «L---». Turn on your handle
to start the synchronization process. It is finished
when «L-1-» is displayed. Turn off the handle. To
assign a second handle to the same SmartGuide
turn on the other handle until «L-2-» is displayed.
After having synchronized the second handle, «Full»
will be displayed. Exit the syncronization mode by
pressing the «h/min» or «set» button, otherwise it
will end automatically after 30 seconds.
Cleaning recommendations
After brushing, rinse your brush head under running
water with the handle switched on. Switch off and
remove the brush head. Clean handle and brush
head separately; wipe them dry before reassembling.
Disassemble the charging unit before cleaning.
Brush head compartment and protective cover are
dishwasher-safe. The basic charger should be
cleaned with a damp cloth only (picture 5, page 5).
Wall mount
Use the adhesive tape (k) if you prefer to mount the
SmartGuide on a wall, mirror or other surface. Make
99700952_D34_WE.indd 13
99700952_D34_WE.indd 13
02.12.10 15:04
02.12.10 15:04
