11
Lay tube on a clean flat surface
Inflate the tube and locate the leak by spraying the tube with
soapy water.
Determine the hole size and cut a circular patch ½
– 1 inch wider
than the hole, using the included repair patch.
Remove air from the tube and dry the tube completely where the
patch is to be applied.
Apply repair patch to area and work out any air bubbles from
beneath the patch.
Apply weight to the patched area for one hour before re-inflating.
Put the bladder back into the cover.
NOTE: Ensure the outer edge seam of the bladder is aligned with
the cover seam and is spread out evenly within the cover. A
misaligned cover can cause distortion and less than optimal
performance of the tube.
Warranty Information
Motion Watersports warrants its products to be free from defects
in material and workmanship under normal use and service
conditions for ninety (90) days after the date of purchase.
All warranty coverage extends only to the original purchaser of the
product and is not assignable or transferable. The original store or
online purchase receipt must be kept as proof of purchase in
order for the warranty to be valid. These documents must be
presented in the event of making a claim under warranty.
During the warranty period, Motion Watersports will provide repair
or replacement of defective equipment or parts thereof covered by
