manualshive.com logo in svg

Oracle ZS4-4, Руководство по установке

Поделиться
Скачать
Oracle ZS4-4 Скачать руководство пользователя страница 211

Troubleshooting Hardware Faults

In rare cases, faults associated with uncorrectable CPU errors are not diagnosable or displayed

in the controller. These faults will be preserved by and observable in the Oracle ILOM, located

in the service processor. Connect to Oracle ILOM on the server platform to diagnose hardware

faults that do not appear in the BUI.

Caution - 

Failure to configure Oracle ILOM connectivity might lead to longer than necessary

hardware fault diagnosis and resolution times.

For more detailed information about Oracle ILOM, see 

“Using Oracle ILOM to Diagnose

Hardware Faults” in 

Oracle ZFS Storage Appliance Cabling Guide

. Also see the Oracle ILOM

documentation located in the documentation library for this software release at 

http://docs.

oracle.com/en/storage/

.

Connecting to Oracle ILOM

After configuring the system and performing initial configuration, it is recommended that you

retain a connection to Oracle ILOM, located in the controller SP, for troubleshooting hardware

problems that do not otherwise appear in the appliance software.

The server Oracle ILOM provides options for (i) network and (ii) serial port connectivity.

Network connection is the preferred choice, as the Oracle ILOM serial port does not always

allow adequate means of platform data collection.

1.

Perform one of the following SP connections:

■

For a network SP connection (recommended), attach an Ethernet cable from the NET MGT

port on the rear panel of the controller to your Ethernet switch.

■

For a serial SP connection, attach a serial cable from the SER MGT port on the rear panel

of the controller to the serial port on the administrative client. Use a DB9 to RJ45 adapter if

necessary.

2.

For clustered controllers, repeat for the second controller.

Troubleshooting Hardware Faults

211

Содержание ZS4-4





















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды