Oracle X9-2, Руководство по обслуживанию

Страница: 43 / 55

Oracle Database Appliance X9-2S/X9-2L Oracle Database Appliance X9-2-HA
Servicing the NVMe Cables (FRU)
The server nodes for this product do not have
NVMe devices.
Component Fault Management Component Fault Management
Component Fault Management
Perform component fault management on Oracle Database Appliance systems.
Typically, when a faulty component is replaced and the server is returned to service,
the fault state of the component in Oracle ILOM is automatically cleared and the
component Service Required indicator will turn off. This is the default behavior for all
components that have an embedded FRU serial number in the component firmware.
For replaced components that do not have an embedded FRU serial number, or do not
automatically clear their fault state after the component has been repaired and the
server is returned to service, you can use Oracle ILOM command line interface to
manually clear the fault state. Use the following syntax:
set / path_to_target clear_fault_action=true
Where path_to_target is the path to the component (such as a DIMM) that had the
fault.
In addition, the Fault Management shell can also be used. Use of the Fault
Management shell is reserved for Oracle Service. For more information on component
fault management:
For systems with Oracle ILOM 5.0, see Using fmadm to Administer Active Hardware
Faults in the Oracle Integrated Lights Out Manager Documentation Library.
Chapter 5
Component Fault Management
5-2