The
GNU GRUB
menu is displayed. It has a 5 second timeout.
Figure 1-7 GNU GRUB Menu
The system is now booting the USB. This process may take up to 5 minutes. After the
process is complete, a login prompt is displayed. If you have missed viewing the login
prompt in the boot messages, press the ENTER key at any time, for a new login prompt.
This is safe.
Figure 1-8 System Booting Using the USB
8.
Login to the system with user name root and a password of talari.
You can set the IP address of the appliance now, or you can set it after installation.
9.
Choose any one option:
•
If you want to defer the setup, press the ENTER key when the system prompts you for
IP4 address
and press
y
to indicate that the configuration is correct.
•
Otherwise, enter the IP4 address with mask width and optionally the gateway. After
completing it, press
y
to indicate that the configuration is correct.
Chapter 1
Booting with the USB Drive
1-13
