32
Sun Datacenter InfiniBand Switch 648 Installation Guide • May 2010
8. Repeat
through
for the second slide rail assembly.
9. Install the cable trees.
See
“Install the Cable Trees” on page 32
Related Information
■
“Suggested Tools for Installation” on page 19
■
“Unsecure the Chassis From the Pallet” on page 28
▼
Install the Cable Trees
The cable trees have two parts, a main trunk and an outer branch. These pieces are
left-right symmetrical and their orientation for installation can be determined as
follows:
■
The main trunk installs at the front of the rack with the reinforcing ribs and cable
shelf tabs toward the centerline of the rack. The square EMI screen mounting hole
is at the bottom of the main trunk.
■
The outer branch installs onto the main trunk with the reinforcing ribs facing to
the rear of the rack. The center reinforcing rib has 4 openings above and 5
openings below.
Содержание Sun Datacenter InfiniBand Switch 648
Страница 1: ...Sun Datacenter InfiniBand Switch 648 Installation Guide Part No 820 7738 12 May 2010 Revision A ...
Страница 8: ...viii Sun Datacenter InfiniBand Switch 648 Installation Guide May 2010 ...
Страница 134: ...124 Sun Datacenter InfiniBand Switch 648 Installation Guide May 2010 ...
Страница 140: ...130 Sun Datacenter InfiniBand Switch 648 Installation Guide May 2010 ...