Oracle Sun Datacenter InfiniBand Switch 648, Руководство по установке

Страница: 107 / 140

Installing the Switch 97
3. Compare what you see to the following table.
4. Verify the fabric card status.
See “Verify the Fabric Card Status” on page 97 .
Related Information
■
Switch Administration , checking status LEDs
■
“Check the Power Supply Status LEDs” on page 80
■
“Check the CMC Status LEDs” on page 80
■
“Check the Line Card Status LEDs” on page 103
■
“Check the CXP Connector Status LEDs” on page 115
▼
Verify the Fabric Card Status
1. Identify the prerequisite and subsequent tasks you must perform in
conjunction with this procedure, to install the switch.
See the table in “Installation Sequence” on page 20 .
2. On the CMC, verify that the installed fabric cards are active:
If an installed fabric card is shown to be
INACTIVE
, investigate why.
Glyph Location Name Color State and Meaning
Left Ok
Ready-to-
Remove Green On – Normal operation at full power.
Off – No power at all applied.
Flashing – Fabric card has been disabled and is ready to be
removed, standby voltage available.
Center Attention Amber On – A fault or critical error has been detected.
Off – Normal operation.
Flashing – No function.
Right Locator White On – No function.
Off – Normal operation.
Flashing – The fabric card is identifying itself.
# showpresent | grep FC