Oracle SPARC T7-1, Руководство по обслуживанию, Страница: 115 / 190

Remove a PCIe Card or Filler
You can perform this procedure. The server must be completely powered down before
performing this procedure. See “Component Service Categories” on page 45 for more
information about cold-service procedures.
1.
Prepare for servicing.
a.
Attach an antistatic wrist strap.
b.
Power off the server and disconnect all power cords from the server power
supplies.
See “Removing Power From the Server” on page 46 .
c.
Extend the server to the maintenance position.
See “Extend the Server to the Service Position” on page 51 .
d.
Remove the top cover.
See “Remove the Top Cover” on page 55 .
2.
Locate the PCIe card or filler that you want to remove.
See “Rear Panel Components (Service)” on page 15 for information about PCIe slots and their
locations.
If you are removing a PCIe filler, go to
Step 6 .
3.
Note the slot location for each PCIe card you plan to remove.
4.
Unplug all data cables from the PCIe card.
Note the location of all cables for reinstallation later.
5.
Remove any transceivers from the PCIe card before removing the card.
Servicing PCIe Cards 115