Oracle SPARC T5-4, Руководство по установке

Страница: 77 / 92

Oracle Solaris OS Configuration Parameters
Powering On the Server for the First Time 77
{0} ok
help boot
boot <specifier> ( -- ) boot kernel ( default ) or other file
Examples:
boot - boot kernel from default device.
Factory default is to boot
from DISK if present, otherwise from NET.
boot net - boot kernel from network
boot cdrom - boot kernel from CD-ROM
boot disk1:h - boot from disk1 partition h
boot tape - boot default file from tape
boot disk myunix -as - boot myunix from disk with flags "-as"
dload <filename> ( addr -- ) debug load of file over network at address
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
or if Forth program, compile it
Related Information
■
“Configure the Preinstalled OS” on page 72
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 73
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 75
■
“Assign a Static IP Address to the NET MGT Port” on page 80
Oracle Solaris OS Configuration Parameters
This topic describes configuration parameters you must provide during initial Oracle Solaris OS
configuration.
Parameter Description
Language Select a number from the displayed language list.
Locale Select a number from the displayed locale list.
Terminal Type Select a terminal type that corresponds with your terminal device.
Network? Select Yes.
Multiple Network
Interfaces
Select the network interfaces that you plan to configure. If you are not sure, select the first one in the list.
DHCP? Select Yes or No according to your network environment.
Host Name Type the host name for the server.
IP Address Type the IP address for this Ethernet interface.
Subnet?
Select Yes or No according to your network environment.
Subnet Netmask (If subnet was Yes) Type the netmask for the subnet for your network environment.
IPv6? Specify whether or not to use IPv6. If you are not sure, select No to configure the Ethernet interface for IPv4.
Security Policy Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not sure, select No.