Oracle sparc M5-32, Руководство по установке

Страница: 32 / 182

22 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
Related Information
■
“General Installation Site Guidelines” on page 22
■
“Preparing for Installation” on page 67
General Installation Site Guidelines
Follow these guidelines when selecting a location for the server.
■
Do not install the server in a location that is exposed to:
■
Direct sunlight
■
Excessive dust
■
Corrosive gases
■
Air with high salt concentrations
■
Frequent vibrations
■
Sources of strong radio frequency interference
■
Static electricity
■
Use power outlets that provide proper grounding
■
A qualified electrical engineer must perform any grounding work
■
Verify the grounding method for the building
■
Observe the precautions, warnings, and notes about handling that appear on
labels on the equipment
Have you set aside an area, away from the installation location, where you can safely
unpack the server?
See
“Unpacking Area” on page 57 .
Data
connections Do you clearly understand the data connections required for setting up the server
and connecting it to the network?
See
“Planning Network Addresses” on page 59 .
Have you prepared network addresses for all data connections?
See:
•
“Mandatory Cable Connections and Network Addresses” on page 59
• “SP Network Addresses” on page 64
• “PDomain Cables and Network Addresses” on page 65
Requirement Question Check