Oracle Secure Backup 10.3, Руководство по установке и настройке, Страница: 91 / 174

Configuring the Administrative Domain with Hosts
Configuring and Managing the Administrative Domain 5-9
4.
Select one or more clients to use this IP address or DNS name from the Host list
field.
5.
Click Add .
The Oracle Secure Backup Web tool displays the PNI in the IP Address: Host List
field.
To remove a PNI:
1.
In the IP Address: Host List field, select the name of the PNI to remove.
2.
Click Remove .
Pinging a Host
You can use the Oracle Secure Backup ping operation to determine whether a host
responds to requests from Oracle Secure Backup on each of its configured IP
addresses.
Pinging a host attempts to establish a TCP connection to the host on each of the IP
addresses you have configured for it. For hosts running Oracle Secure Backup, the
connection occurs on TCP port 400. For hosts that use the NDMP access mode,
connections occur through the configured NDMP TCP port, usually 10000.
Oracle Secure Backup reports the status of each connection attempt and immediately
closes each connection that has been established successfully.
To ping a host:
1.
From the Hosts page, select a host to ping.
2.
Click Ping .
A status line appears on the page with the results of the operation.
Viewing or Editing Host Properties
If you are having difficulties in configuration, then you might be required to view or
edit the configuration of a host. To display or edit host properties:
1.
From the Hosts page, select the name of the host whose properties require editing.
Select the Suppress communication with host option to edit a host that is
currently not accessible through the network.
2.
Click Edit .
The Oracle Secure Backup Web tool displays a page with details for the host you
selected.
3.
Make any desired changes to the host properties.
4.
Click OK to save your changes.
Updating a Host
When you add or modify a host in an Oracle Secure Backup administrative domain,
Oracle Secure Backup exchanges messages with that host to inform it of its changed
state. If you select the
Suppress communication with host option during an add or
edit operation, however, then the host contains out-of-date configuration information.
Use Update Host to send fresh state information to the host.