Oracle Secure Backup 10.3, Руководство по установке и настройке, Страница: 34 / 174

Installing Oracle Secure Backup on Linux or UNIX with installob
2-8 Oracle Secure Backup Installation and Configuration Guide
Installing Oracle Secure Backup on Linux or UNIX with installob
To install the Oracle Secure Backup software on Linux or UNIX:
1.
Ensure that the SCSI parameters for each tape device available.
You can enter these parameters to create an attach point for each SCSI device as
part of the initial installation. Solaris 10 systems have special device configuration
procedures. See
"Configuring the Solaris sgen Driver to Provide Oracle Secure
Backup Attach Points" on page 2-18.
2.
Start the
installob
script.
The Oracle Secure Backup setup script ends by asking to start the installation
process using the
installob
script. If you enter
yes
to this question, then the
setup script runs the
installob
script for you.
Otherwise, start
installob
from the command prompt. While logged in as
root
, go to the Oracle Secure Backup home and enter the following command:
install/installob
The
installob
script displays a welcome message and tells you that most of its
questions have default answers, which you can select by simply pressing Enter .
3.
Confirm the settings in the
obparameters
file.
This step depends upon the value of the
customized obparameters
parameter
in the
obparameters
file described in "Configuring Installation Parameters in the
obparameters File" on page 2-7. The two possibilities are:
■
You have edited the
obparameters
file and set
customized
obparameters
to
yes
.
In this case, the
installob
script assumes that you have made the changes
you want in the
obparameters
file and uses those parameters during the
installation. Continue to step 4.
■
The
customized obparameters
parameter is set to
no
, which is the default.
In this case, the
installob
script asks if you have reviewed and customized
the
obparameters
file. Choose one of these options:
– Enter
yes
or press the Enter key to indicate that you do not want to
customize the
obparameters
file. Continue to step 4.
– Enter
no
to indicate that you do want to customize the
obparameters
file. The
installob
script tells you to rerun the script after reviewing
obparameters
. The
installob
script then exits.
4.
Specify the host role.
See Also:
■
Oracle Secure Backup Administrator's Guide for more information
about the preauthorized
oracle
user and RMAN backups.
■
Appendix B, "Oracle Secure Backup obparameters Installation
Parameters"
See Also:
"customized obparameters" on page B-1 for details about
the
customize obparameters
parameter.