Oracle Netra SPARC, Руководство администратора

Страница: 51 / 108

Change the Host Boot Mode Behavior at Reset (Oracle ILOM)
Change the Host Boot Mode Behavior at Reset (Oracle
ILOM)
The
/HOST/bootmode
state property controls how OpenBoot NVRAM variables are used.
Normally the current settings of these variables are retained. Setting
/HOST/bootmode
state=reset_nvram
changes the OpenBoot NVRAM variables to their default settings at the
next reset.
At the Oracle ILOM prompt, type:
-> set /HOST/bootmode state=
value
where value is one of the following:
■
normal
– At next reset, retains current NVRAM variable settings.
■
reset_nvram
– At next reset, returns OpenBoot variables to default settings.
Note -
The
state=reset_nvram
property returns to normal after the next server reset or 10
minutes. (See “Display the Host Boot Mode Expiration Date (Oracle ILOM)” on page 52 .)
The
config
and
script
properties do not expire. Those two properties are cleared when the
server resets or when you clear them manually by setting value to
""
(
""
indicates an empty
script).
Related Information
■
“Reset the Server (Oracle ILOM)” on page 30
■
“Boot Mode Overview (Oracle ILOM)” on page 49
■
“Oracle VM Server for SPARC Overview” on page 13
Manage the Host Boot Mode Script (Oracle ILOM)
At the Oracle ILOM prompt, type:
-> set /HOST/bootmode script =
value
where
script
controls the host server's firmware OpenBoot method of booting.
script
does not affect the current
/HOST/bootmode
setting.
value can be up to 64 bytes in length.
Configuring Boot and Restart Behavior 51