Technical Information
31
Series 2 Cash Drawer
The Series 2 Cash Drawer connector is an 8-pin Mini-IDN. You can convert this connector
into a traditional 4-pin IDN connector by using a P/N 300290-020 cable.
Figure 5 - Series 2 Cash Drawer Pin Reference
The following table describes the signal name and function of each pin:
Table 6 - Series 2 Cash Drawer Pin and Signal Reference
Pin #
Signal name
Description
1
VCC12 or VCC24
Cash Drawer power
2
CD_OPEN
Open drawer
3,7,8
Ground
Signal grounds
4
CD_ST
Input status from cash drawer
5
MCU_TX_5V
Tx data to Cash Drawer
6
MCURX
Rx data from Cash Drawer
Customer Display
The customer display port contains the following pins:
Figure 6 - Customer Display Pin Reference
System Board Removable Components
You can remove the following components:
1.
mSATA (MO-300A)
2.
Half-slim SSD (MO-297) (not shown)
3.
SD card
