Introduction to the Workstation 6
11
In this state:
o
The AC power cord is connected to a wall outlet.
o
The operating system and applications are not running.
o
The RAM contents are undefined.
o
The Operator LED is off.
o
The Operation LCD is blank.
•
ON
In this state:
o
The operating system and POS application are in operation.
o
The RAM contents are maintained.
o
The Operator LED is blue.
Power Management State Changes
The following table describes the scenarios in which the Workstation 6 power
management state changes.
Table 1 - Power Management State Changes
Starting State
Event
Resulting State
Unplugged
AC power is connected to a wall outlet and the
last recorded power state was not the ON state.
NOPOWER
NOPOWER
The operator presses the power button for less
than 1 second.
ON
NOPOWER
The operator presses the power button for more
than 4 seconds.
ON
NOPOWER
A server application sends a Wake On LAN
command.
ON
NOPOWER
AC power fails and then is restored.
NOPOWER
ON
The operator presses the power button for more
than 4 seconds.
NOPOWER
ON
The application shuts down the workstation.
NOPOWER
ON
The Client Application Loader sends a Restart
command.
NOPOWER
and then ON
ON
AC power fails and then is restored.
ON