9
Safety and Handling
This section contains important information regarding the safety, care, and handling of
the KDC-210.
Safety Agency Compliance Statements
Safety Precautions
For your protection, observe the following safety precautions when setting up your
equipment:
•
Follow all cautions and instructions marked on the equipment.
•
Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
•
Never push objects of any kind through openings in the equipment. Dangerous
voltages may be present. Conductive foreign objects could produce a short circuit
that could cause fire, electric shock, or damage to your equipment.
•
This product is intended for restricted access whereby access is controlled through
the use of a means of security (for example, key, lock, tool, badge access) and
personnel authorized for access have been instructed on the reasons for the
restrictions and any precautions that need to be taken.
•
Do not directly connect this product to outdoor metallic communications cables.
Always connect the product to outdoor metallic communications cables using a
protection device that is designed for direct connection to outdoor metallic
communications cables (such as a switch or router), or use optical non-metallic
communications cables upon leaving the building.
•
Do not directly connect this product to outdoor power cables.
–
For AC Power, connect the product only to an indoor power distribution
system that uses current-limiting circuit breakers for AC power.
–
For DC Power, connect the product only to earthed power systems that are
completely contained within one building.
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Oracle is not
responsible for regulatory compliance of a modified Oracle product.
9-1
