Oracle Fabric Interconnect F2-12, Руководство по установке, Страница: 85 / 118

Assign a Static IP Address to the SCP
■
“Connect Power Cords” on page 77
■
“Power On the Switch” on page 81
■
“Log In to the SP (SER MGT)” on page 82
■
“Assign a Static IP Address to the SCP” on page 85
■
“Log In to the SP (Network Management)” on page 86
Assign a Static IP Address to the SCP
The switch ships with DHCP IP address assignment for the SCP.
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2.
Access the Oracle ILOM CLI.
See “Log In to the SP (SER MGT)” on page 82 or “Log In to the SP (Network
Management)” on page 86 .
3. Start the host console.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type ESC (
4. Press the Enter key.
hostname
login:
5.
Log in as the
root
user.
hostname
login: root
Password: changeme
Last login: Fri May 25 09:51:36 on ttyS0
[root@
hostname
~]#
The default password is
changeme
.
6.
If this is the first time the switch has been started, or if the switch config has
been cleared, through the Oracle Fabric OS Configuration Wizard:
a. Specifying the SCP address allocation method, either static or dhcp.
b. (Optional) For a static SCP address, specify the IP address and netmask in
dotted decimal notation.
Powering On the Switch 85