Oracle Fabric Interconnect F2-12, Руководство по установке

Страница: 105 / 118

Log In to the Oracle Fabric OS Interface
Parameter Value
What is the chassis MAC address?
Note - MAC addresses must be unique for each switch for vNICs to operate correctly.
Choose from displayed, or enter
specific private MAC address.
Related Information
■
“Verify LED Status” on page 89
■
“Verify That the Switch Is Operational” on page 94
■
“Verify Connectivity” on page 96
■
“Log In to the Oracle Fabric Manager Interface” on page 106
■
“Log In to the Oracle Fabric OS Interface” on page 105
■
“Run the Oracle Fabric OS Configuration Wizard” on page 102
Log In to the Oracle Fabric OS Interface
When you log in to the Oracle Fabric OS interface for the very first time, the Oracle Fabric OS
configuration wizard starts. Only after completing the Oracle Fabric OS configuration wizard
can you manage the switch through the Oracle Fabric OS Interface.
1. Choose a method of accessing the Oracle Fabric OS interface:
■
From a management network attached host, start an SSH session and
connect to the SCP by specifying the IP address you previously configured.
$ ssh admin@
SCP_IP_address
admin@
SCP_IP_address
's password:
password
Welcome to OFOS Controller
Copyright (c) 2012, 2016, Oracle and/or its affiliates. All rights reserved.
Enter "help" for information on available commands.
Enter the command "show system copyright" for licensing information
admin
@
hostname
[OFOS]
where:
■
admin is the username of the Oracle Fabric OS administrator.
■
SCP_IP_address is the IP address assigned by DHCP or that you configured in
“Assign a Static IP Address to the SCP” on page 85 .
■
password is the password of the SCP's password you configured through the Oracle
First Boot wizard.
Verifying Functionality 105