ib_cm 35714 2 rdma_cm,ib_ipoib
ipv6 290974 5 bonding,cnic,ib_sdp,ib_addr,ib_ipoib
ib_sa 39126 6 rdma_ucm,rdma_cm,ib_ipoib,ib_cm,mlx4_vnic,mlx4_ib
ib_core 66876 12
rdma_ucm,ib_sdp,rdma_cm,iw_cm,ib_ipoib,ib_cm,ib_uverbs,ib_umad,mlx4_vnic,mlx4_ib,ib_s
a,ib_mad
[root@bda10 ~]# lsmod | grep rds
rds 94503 0
[root@bda10 ~]#
8.3 Physical Connectivity
On both GW switches of Oracle Big Data Appliance, four ports are available for
external connections-5A, 5B, 6A, 6B. Oracle recommends that you use ports 5A on
both leaf switches. If these ports are not available, use any other available port on the
leaf switches.
Note:
Never connect a host (HCA) system to the spine switch inside a rack.
If the Oracle Big Data Appliance rack is connected to other Oracle Engineered
Systems, port 5-6[A|B] may not be available. In such a case, it is recommended to use
any other available port on the InfiniBand leaf switch of the Oracle Big Data Appliance
rack. If no free ports are available, contact Oracle Support.
shows how to connect an Exalytics to a standalone BDA rack.
Chapter 8
Physical Connectivity
8-3