Oracle Exalytics In-Memory Machine Скачать руководство пользователя

Страница: 46 / 85

When you configure host name using the

exalytics_configure_network.sh

script, the

following files are updated:

/etc/sysconfig/network

/etc/hosts

Note:

The script keeps a copy of the interface files in the

/tmp/exalytics.save/

directory and creates a flat backup for the files that may be modified.

4.7.1.5 Time

The

exalytics_configure_network.sh

script optionally configures the time zone using

the

tzselect

script. This script guides you to select a continent, country, and city using

numbered menu selection. The script verifies whether a network time server should be
configured. If you choose to configure a server, the script prompts you to enter the
server name and other required information.

If you do not opt for time server configuration, the script prompts you to set time and
date.

For network time server configuration, the script modifies the

/etc/ntp.conf

file, and it

starts the

ntpd

daemon and adds it to start at boot.

For time zone selection, the script creates a new soft link to

/etc/localtime

Note:

The script keeps a copy of the interface files in the

/tmp/exalytics.save/

directory and creates a flat backup for the files that may be modified.

4.7.1.6 Domain Name Server (DNS)

The

exalytics_configure_network.sh

script optionally configures one or more domain

name servers that you specify.

When you configure domain name servers using the

exalytics_configure_network.sh

script, the following file is updated:

/etc/resolv.conf

Note:

The script keeps a copy of the interface files in the

/tmp/exalytics.save/

directory and creates a flat backup for the files that may be modified.

Chapter 4

Configuring the Network for Oracle Exalytics In-Memory Machine

4-10

Содержание Exalytics In-Memory Machine






















































































Результаты поиска

Содержание Exalytics In-Memory Machine

Отзывы:

Похожие инструкции для Exalytics In-Memory Machine

Бренды по названию

Популярные бренды

Oracle Exalytics In-Memory Machine, Руководство пользователя

Результаты поиска

Содержание Exalytics In-Memory Machine

Отзывы:

Похожие инструкции для Exalytics In-Memory Machine

Бренды по названию

Популярные бренды