manualshive.com logo in svg

Oracle Exalogic Elastic Cloud, Руководство пользователя, Страница: 36 / 342

Поделиться
Скачать
Oracle Exalogic Elastic Cloud Скачать руководство пользователя страница 36

15.

Press the soft switches located on the front of the compute nodes.

16.

Verify that power is applied to the Ethernet switch.

17.

Verify that power is applied to the NM2-GW InfiniBand Gateway switches.

18.

(Only for half and full racks.) Verify that power is supplied to the NM2-36

InfiniBand Switch.

19.

Proceed to configure the Exalogic machine.

3.2 Prepare to Install an Exalogic Machine

This section contains the following topics:

•

Before You Begin

•

Exalogic Installation Safety Guidelines

•

Unpack the Exalogic Machine Rack

•

Tools for Installation

•

Prepare the Installation Site

3.2.1 Before You Begin

Before installing the Exalogic machine, or installing any server or equipment into the

rack, read the Important Safety Information for Sun Hardware Systems (816-7190)

document included with the rack.
Observe all safety notices printed on the packaging and listed in the Sun Rack II Safety

and Compliance Guide

 (820-4762) and the Sun Rack II Power Distribution Units Users

Guide

 (820-4760). Go to 

http://download.oracle.com/docs/cd/E19657-01/

index.html

 to download these guides.

Exalogic machine cabinets can enclose a variety of rack-mountable Sun servers,

storage products, and other third-party equipment.

3.2.2 Exalogic Installation Safety Guidelines

Before the Exalogic machine arrives, the following safety precautions should be

reviewed to ensure the site is safe, as well as ready for delivery. Failing to observe

these precautions can result in injury, equipment damage, or malfunction.

•

Do not block ventilation openings.

•

Do not install the Exalogic machine in a location that is exposed to direct sunlight

or near a device that may become hot.

•

Do not install the Exalogic machine in a location that is exposed to excessive dust,

corrosive gases, or air with high salt concentrations.

•

Do not install the Exalogic machine in a location that is exposed to frequent

vibrations. Install the Exalogic machine on a flat, level surface.

•

Use a power outlet that uses proper grounding. When using shared grounding,

the grounding resistance must not be greater than 10 ohms. Ensure that your

Prepare to Install an Exalogic Machine

3-2  Oracle Exalogic Elastic Cloud Machine Owner's Guide

Содержание Exalogic Elastic Cloud























































































































































































































































































































































Отзывы:

Нет отзывов