Oracle Exalogic Elastic Cloud, Руководство пользователя

Страница: 37 / 342

facility administrator or a qualified electrical engineer verifies the grounding
method for the building, and performs the grounding work.
• Be sure that each grounding wire used for the Exalogic machine is used
exclusively for the Exalogic machine. Also be sure to observe the precautions,
warnings, and notes about handling that appear on labels on the equipment.
• Do not place cables under the equipment or stretch the cables too tightly.
• Do not disconnect power cords from the equipment while its power is on.
• If you cannot reach the connector lock when disconnecting LAN cables, then press
the connector lock with a flathead screwdriver to disconnect the cable. You could
damage the system board if you force your fingers into the gap rather than using a
flathead screwdriver.
• Do not place anything on top of the Exalogic machine or perform any work
directly above it.
• Do not let the room temperature rise sharply, especially in winter. Sudden
temperature changes can cause condensation to form inside the Exalogic machine.
Allow for a sufficient warm-up period prior to server operation.
• Do not install the Exalogic machine near a photocopy machine, air conditioner,
welding machine, or any other equipment that generates loud, electronic noises.
• Avoid static electricity at the installation location. Static electricity transferred to
the Exalogic machine can cause malfunctions. Static electricity is often generated
on carpets.
• Confirm that the supply voltage and frequency match the electrical ratings
indicated on the Exalogic machine.
• Do not insert anything into any Exalogic machine opening, unless doing so is part
of a documented procedure. The Exalogic machine contains high-voltage parts. If
a metal object or other electrically-conductive object enters an opening in the
Exalogic machine, then it could cause a short circuit. This could result in personal
injury, fire, electric shock, and equipment damage.
See Also:
• Important Safety Information for Sun Hardware Systems (816-7190) document
that is included with the rack
• All safety notices printed on the packaging and listed in Sun Rack II Safety
and Compliance Guide (820-4762), and Sun Rack II Power Distribution Units
Users Guide (820-4760)
3.2.3 Unpack the Exalogic Machine Rack
Refer to the unpacking instructions included with the packaging when unpacking the
rack from the shipping carton. After unpacking the rack, follow local laws and
guidelines to recycle the packaging properly.
Prepare to Install an Exalogic Machine
Install Planning and Procedure 3-3