Oracle EXADATA X6-2 Скачать руководство пользователя страница 55

Страница: 55 / 284

Use the Oracle ILOM Web Interface for Immediate Shutdown

Preparing for Service

The server powers down immediately.

Disconnect the power and data cables from the server.

See

“Disconnect Cables From the Server” on page 56

Caution -

When the server is powered down, it enters standby power mode In standby power

mode, power is still directed to the service processor remote management subsystem and power

supply fans. To completely power off the server, you must disconnect the power cords from the

power supplies.

Related Information

■

“Use the Power Button for Immediate Shutdown” on page 54

■

“Use the Oracle ILOM Web Interface for Immediate Shutdown” on page 55

Use the Oracle ILOM Web Interface for Immediate Shutdown

Caution -

An immediate power down might corrupt system data, so only use this procedure to

power down the server after attempting the graceful power down procedure.

Log in to the Oracle ILOM web interface using an Administrator account.

The Oracle ILOM web interface System Information page appears.

In the left pane, click Host Management → Power Control, and select Immediate

Power Off in the Select Action list.

Click Save, then click OK.

The server powers down immediately.

Disconnect the power and data cables from the server.

See

“Disconnect Cables From the Server” on page 56

Caution -

When the server is powered down, it enters standby power mode In standby power

mode, power is still directed to the service processor remote management subsystem and power

supply fans. To completely power off the server, you must disconnect the power cords from the

power supplies.

Related Information

■

“Use the Power Button for Immediate Shutdown” on page 54

■

“Power Down Server Gracefully Using the Oracle ILOM CLI” on page 51

■

“Power On the Server” on page 194

Содержание EXADATA X6-2





























































































































































































































































































Результаты поиска

Содержание EXADATA X6-2

Отзывы:

Oracle EXADATA X6-2, Руководство по обслуживанию, Страница: 55 / 284

Результаты поиска

Содержание EXADATA X6-2

Отзывы: