3-4
Oracle Telecommunications Billing Integrator Implementation Guide
Defining XML Standards
Define Open Applications Group (OAG) as the XML standard.
Navigation: Oracle XML Gateway Setup > Define XML Standards.
Notes
Standard Code:
This is the name or code for the standard body of the XML messages.
Enter 'OAG'
Standard Type:
Enter 'XML'.
Defining a Hub
A hub is defined as an integration point within your network.
Navigation: Oracle XML Gateway Setup > Define Hubs.
Notes
Name:
Enter 'XNB_HUB'.
Protocol Type:
Select JMS. This value identifies the type of messages that are passed
through the hub and provides a method for inbound and outbound agent listeners to
filter the messages from a common queue. If this value is not available in the LOV, it
must be enabled for the XML Gateway. To enable the values:
1.
Select XML Gateway Setup > Define Lookup Values.
2.
Query for the lookup type 'COMM_METHOD'.
3.
Locate the lookup value with code 'JMS' and enable it.
Protocol Address
: Enter 'WF_JMS_OUT'. This is the outbound queue to process
outbound transactions.
Note:
Middleware should be configured accordingly, so that it picks up
the outbound messages from WF_JMS_OUT and enqueues the inbound
messages to WF_JMS_IN.
Defining Hub Users
A hub user represents an application that takes part in the message exchange.
To define middleware as a hub user, enter XNB as the user name and the hub entity
code.
To define the billing application as a hub user, enter the name of the billing application
as the user name and hub entity code.
