Oracle ATLS2XGF, Руководство пользователя

Страница: 63 / 86

Chapter 6 Configuring the Jumbo Frames Feature 53
Enabling Jumbo Frames in a Solaris
Environment
This section describes how to enable jumbo frames in both a SPARC and an x86
environment.
▼
To Enable Jumbo Frames in a Solaris
Environment Using
nxge.conf
1. Enable Jumbo Frames for a port using the
nxge.conf
file. For example,
2. Reboot the system:
3. Set the maximum MTU for maximum performance:
▼
To Check Layer 2 Configuration
●
View the maximum transmission unit (MTU) configuration of an
nxge
instance
at any time with the
kstat
command.
The
kstat mac_mtu
variable represents the complete size of the Ethernet frame,
which includes the Ethernet header, maximum payload, and
crc
. This value
should be equal to or less than the MTU configured on the switch.
name = "pciex108e,abcd" parent = "/pci@780/pci@0/pci@8/network@0"
unit-address = "0"
accept-jumbo=1;
%
boot -r
# ifconfig nxge mtu 9194
# kstat nxge:0 | grep mac_mtu