To Install the HBA
4.
Ensure that you have the proper cables for the HBA and the internal disk drives.
Use only Oracle-provided SAS cables (provided with your Oracle system at time of purchase).
Cable connectors are keyed so that you cannot insert them incorrectly.
5.
Unpack the box containing the HBA in a static-free environment and inspect it
for damage.
Note -
Leave the HBA in the protective bag until you are ready to install it. If there is damage,
contact Oracle customer support.
6.
Refer to your system installation guide or service manual for instructions on
how to remove the system cover, disconnect the AC power cords, and turn off
power from the system, if required.
To Install the HBA
1.
Attach an antistatic wrist strap and remove the HBA from its protective bag.
“Observing ESD and Handling Precautions” on page 13
.
2.
Refer to the installation guide or service manual for your particular system for
instructions on how to locate an available PCIe slot in the system.
3.
Align the PCIe bus connector of the HBA to the PCIe slot.
Note -
Some PCIe slots support PCIe graphics cards only; if the HBA is installed in one of
those PCIe slots, the HBA will not function.
Chapter 2 • Hardware Installation and Removal
15
Содержание 7116970
Страница 2: ......