To Install the Converged Network Adapter
b.
Remove the mounting bracket screws from the adapter (See the following
figure.).
c.
Remove the bracket and store it for future use.
d.
Align the new mounting bracket tabs with the holes in the adapter.
Note -
Be careful not to push the bracket past the grounding tabs of the transceiver housing.
Ensure that the LEDs are properly aligned with the holes in the bracket.
e.
Replace the screws that attach the adapter to the bracket.
f.
Reinstall the SFP(s), if removed in step a.
Chapter 2 • Hardware Installation and Removal
21
Содержание 7105381
Страница 2: ......