User’s guide VS 2000 CA User’s guide VS 2000 CA
Safety precautions:
•
Before putting the machine into operation please read the safety
precautions, manufacturer recommendation and the operation manual.
The operation manual should be easily available at any time for the
operator.
•
The machine should be installed on a sturdy and level surface near the
230V socket
•
The machine should be protected against moisture and dust
•
Do not place the machine near the heating units or ventilation units
•
The machine should not be used in vicinity of inflammable liquids or
gases
•
The supplying cable should be protected against any damage, must not
be used to pull the machine or to remove plug from a socket
•
During a long standstill or before replacing the machine, unplug the
machine from the socket
•
The machine is turned off completely after removing the plug from
a socket
•
The machine should be kept away from children’s reach
•
Danger! Machine contains rotary elements. Be careful with long hair,
loose jewellery, ties and other loose pieces of clothing – they can
become entangled in cutting head.
•
Be careful when reaching the feeding slot
•
Use the machine only according to its destination!
•
It is necessary to check and supervise if the machine operates
correctly. In case of any malfunctions it is required to contact service
point.
•
The machine must not be located outside, should be operated in room
temperature higher than +8°C
•
Before removing any cover from the machine, unplug the machine from
the socket
•
Using inappropriate lubricants causes fire hazard!
•
The machine should be operated according to general safety rules.
•
Any repairs can be conducted only by authorised staff.
1
6
Declaration of Conformity
Deklaracja Zgodności
OPUS Sp.z o.o. hereby declares that the machine specified below is in accordance with the
following directives and standards:
Opus Sp.z o.o. deklaruje z pełn
ą
odpowiedzialno
ś
ci
ą
,
ż
e urz
ą
dzenie, którego dotyczy niniejsza
deklaracja jest zgodne z postanowieniami nast
ę
puj
ą
cych dyrektyw UE oraz powi
ą
zanymi z nimi
normami zharmonizowanymi:
73/23/EWG , 89/336/EWG , 99/5/WE
PN-EN 60950:2000 ; PN- EN 55014-1:2001; PN –CISPR 16-1: 1997; PN –CISPR 16-2: 1999
Name/ Nazwa :
OPUS Sp. z o. o.
Address/ Adres
:
ul. Toru
ń
ska 8 44-122 Gliwice
Type of the machine / typ
:
Niszczarka / Shredder
Model No / model :
VS 1500 CA
POLAND / Polska
…………………………………
(Place / Kraj)
(Signature / podpis)
05.04.2005 Aleksander Macha
(Date / Data)
(Full Name/ Imi
ę
i Nazwisko)
