Opus uniLAM A4, Руководство пользователя

Страница: 3 / 12

OPUS uniLAM A4 Basic • User guide
EN
3
2 MANUFACTURER'S RECOMMENDATIONS
• Use only recommended supplies and accessories from OPUS (see www.opus.pl)
• If the equipment is switched on and is not operated for more than one hour, it could get
overheated in such an instance, to avoid bad quality laminating put 1 or 2 sheet of A4
paper through in order to cool the rollers down.
• Always insert the pouch with the closed end first into the laminator. Putting the open
end first can cause bubbling and the film may rap and get stuck round the rollers inside
the laminator.
• When cutting tailor made shapes from the pouch it can make the rollers sticky and dirty
from the glue which can cause the pouch to wind round the rollers, you must use a car-
rier. ASK YOUR DEALER FOR INFORMATION.
• Remove any sharp or metal elements from the document like (staples & paper clips, etc.)
before laminating.
WARNING!
THE EQUIPMENT CONTAINS HEATING ELEMENTS, BE AWARE OF HIGH TEMPERATURES!
!! BURN HAZARD !!
WARNING!
THE ROLLERS START TURNING WHEN YOU SWITCH ON THE LAMINATOR AND RUN UNTIL YOU
SWITCH OFF.
WARNING!
NOT COMPLIANCE WITH THE RULES AND RECOMMENDATIONS ABOVE CAN VOID THE GUARAN-
TEE/WARRANTY