Power
Paper Jam
Overheat Full waste bin
protection
1 – Reverse
2 – Forward
3 – Display
4 – Feeding slot
5 – Feeding slot for CD/DVD
or credit cards
6 – Transparent window
7 – Waste bin
8 – Castors
3
CONSTRUCTION OF THE MACHINE
4
OPERATION
• The equipment should be placed on a level floor.
• Before plugging in the equipment, ensure that main switch is in “0” position.
• Set the main switch into „I” position – green diode will be on.
• Insert paper into the feed slot on the top. NOTE! Paper should be only put in the middle
of the slot.
• The equipment will start automatically after inserting the paper.
• Maximum paper width of 225mm. If the pages are wider, cut or fold to fit the slot.
You can only shred 15 sheets of 75 g/m
2
paper at a time.
• Shredding CD/DVD or credit cards. The shredder shreds only one CD/DVD or credit card at
a time.
• It is impossible to shred paper and CD/DVDs or credit cards at the same time.
• After 5 minutes of continues work electric motor will overheat and machine stop
immediately. Red diode will be on. Wait 50 minutes until it cools down.
• Turn the power switch off when shredding is finished.
• If too many pages of paper are inserted into the slot, it will cause the paper to jam inside
the cutting blades.
• Pull out the surplus jammed/stuck paper and slide the switch to REV to (reverse) the paper
out. Next push Forward button.
• If it will not solve the problem, contact the dealer or the service team.
NOTE!
Not complying with the recommendations above can result, with the guarantee/warranty
being made void.
OPUS TS 2215 CD • User guide
GB
9
