SOFTWARE UPGRADE
You are able to upgrade the MBE-300 with new versions of software when
availed, ask your supplier about the interface to link up a computer.
You must put the equipment into the service position as shown on a diagram
below.
Interface must be connected to the USB port and in accordance with the software
guide to transfer the new version to the equipment.
The equipment must be placed into the service position to remove the bottom
cover. To open the cover it is necessary to remove 6 screws on the top and bottom
edges of the bottom cover.
RECOMMENDED MATERIALS
The equipment is designed to bind sheets of paper of diff erent thicknesses
and many types of covers made from covered card or plastic. Before binding other
materials, we suggest that you check the binding eff ectiveness of the product.
It is recommended that you use all binding products from the OPUS range of
materials such as the Metalbind system, covers and channels of OPUS.
You can use other products, without damaging the equipment, however the
eff ectiveness and quality, we cannot guarantee or the outcome.
86%3257
6&5(:6
72%(
5(029('
12
SCREW
TO BE
REMOVED
USB PORT
