Opus LRC500, Руководство пользователя

Страница: 9 / 12

9
MCU500
Detailed Buttons and Setting the Tuner Presets
Tuner Keys
Tunes tuner/preset keys
(depending on mode selected)
Store
To store tuner presets
Mode
Selects preset or search mode
Zone Active
LED lit to indicate
current active zone
Power
Power Switch for MCU
Note: In normal operation you do not
need to power off the Opus system
with this switch. Simply use the
standby buttons on each keypad. If
you do switch off the MCU then all
bass, treble and other settings will
need to be set again at each WCU
keypad.
Clone Port
Transferring IR commands
from LRC500 (explained later)
Setting the Tuner Presets
This is done via the buttons on the MCU's front panel. 29 FM, seven AM/MW and seven LW
presets are available.
Step One
– Put the tuner into scan mode by pressing the Mode button.
Step Two
– Use the Up and Down buttons to find the station you wish to store.
Step Three
– Press the Store button and the tuner will automatically display the next available
preset number.
Step Four
– To store the station in this location press store. You can store the station in a differ-
ent location by using the up and down keys to select a new location and then press store.
Step Five –
If you wish to store presets in another waveband (FM, MW/AM or LW) press the
Band button to select a new waveband and repeat step 4.
Step Six –
Once you have stored your presets press Mode. This puts the tuner back into preset
mode. In the preset mode the and keys on the keypad skip up and down through the
presets.
Erasing Tuner Presets
Erasing Tuner Presets
– Only works with MCU500 Software version v2.3 or higher. (Update
your MCU software to the latest version, contact your dealer who will arrange this for a charge).
Step One – Power down the MCU
Step Two -- Hold down the ‘Store’ and ‘Mode’ buttons on the front of the MCU.
Step Three -- Power up the MCU whilst still pressing buttons.
Step Four -- The tuner LCD display will stay blank.
Step Five -- Release the buttons and the tuner LCD will return to normal.
Step Six -- The presets will now be erased, start storing new presets from preset 1.
Note – The tuner only skips through presets that have been set. If only four presets are set the
tuner will skip 1-2-3-4-1-2-3-4 and so on. If no presets are set or only one is set the tuner will not
skip at all.
IR Indicator
LED flashes to indicate IR transmission
Operational buttons on the MCU500