7 POSSIBLE MALFUNCTIONS
Malfunction
Possible Cause
Remedy
Equipment does
not start after inserting
paper into the slot.
1. Not plug in properly.
2. Pages to be shred are
too soft.
3. Overheated.
4. Paper jammed inside.
5. The waste bin is not fit-
ted properly.
1. Plug the equipment in
correctly.
2. Fold pages or insert
more paper in the feed
opening.
3. Turn off the shredder,
wait about 30 min.
4. Turn on once again.
5. Remove jammed/stuck
paper.
6. Fit waste bin correctly.
Equipment does not stop
after shredding.
Paper sensor in the entry
slot is covered by scraps of
paper.
Unplug the shredder first
then, clean the paper
sensor next to the clear
shredding blade switch.
The shredder operates
too loud.
Equipment is not on
a sturdy and level floor.
Place the machine on stu-
dy and level floor.
The shredder does not
operate correctly.
1. Too many pages inserted
into the feed opening.
2. Too big paper format.
3. Paper is not inserted in
the centre of feed opening.
1. Reduce number of
pages inserted to the slot
at one time.
2. Switch to the REV but-
ton to remove the papers
and insert folded pages
once again.
3. Insert paper in the cen-
trally in the feed opening.
GB
11
