Opus Air OPUS OP2, Руководство пользователя

Страница: 27 / 39

Changing a faulty bladder when
product is not inflated/in use
Ensure zip doesn’t pinch bladder! Zip beam back in straight and
aligned to the holes in the tube. If a replacement air beam is fitted
and the length exceeds the
opuscamper.com.au
25
INSTALLING YOUR
Air OPUS® ANNEXE
STEP 1
Locate the faulty air beam and check that
all valves are closed on the beam.
STEP 7
Reattach the crosslinking tye to
the repaired beam. This is a firm
fit -ensure it is pushed on ALL the
way and sitting flush before
reopening valve.
STEP 8
Reopen the crosslinking valves to
allow air to equalise. To repressurise
the camper, open your main valve
and reactivate pump - this will shut
off again once the cabin reaches
pressure. Relock your crosslinking
valves again once done to retain
pressure.
STEP 2
Remove linking air tube from faulty beam.
STEP 6
Once succesfully repaired, reverse a bove steps.
STEP 3 Unzip the outer retaining sleeve to reveal the
grey beam tube.
STEP 5
Remove the bladder from the structural tube as
shown. Reinflate the bladder and locate the
puncture. Using the repair kit provided, patch
the hole and let dry. Test the puncture is sealed
by reinflating using the hand pump supplied.
DO NOT OVER INFLATE. If the bladder can not be repaired
please contact the dealer.
STEP 4 Undo the ties holding the zips on the grey tube
together and unfasten the zip. While unzipping
or zipping be careful NOT to allow the zipper to
pinch the air tube.
IMPORTANT
DO NOT CHANGE OR UNZIP
BLADDERS WHEN CAMPER IS
INFLATED. ISOLATE BEAM &
DEFLATE BEFORE BEGINNING
IMPORTANT