Opus Air OPUS OP2, Руководство пользователя

Страница: 13 / 39

opuscamper.com.au
11
SETTING UP YOUR
Air OPUS® CAMPER
Unlatch the lid starting at the rear of the
camper. Lift the lid 20cm.
S
TEP 6
Unwind the front winch until the strap is long
enough to reach the back of the camper. Clamp
the winch onto the rear eyelet mounted on the
back of the lid. Unwind the rear supporting
winch and clip on with enough slack to
allow the lid to rise to vertical.
S
TEP 7
Ensuring that the strap remains flat and
tensioned, slowly wind the winch in to bring the
lid up and over the camper. The gas struts will
take the weight of the lid.
S
TEP 8
At this stage walk around the Air OPUS® and
inspect the tent to ensure that the canvas is
properly located within the aluminium channels
and that no part of the tent is caught or
snagged.
S
TEP 10
At front of camper fit each corner of the canvas
over the corner of the lid. The seam on the
canvas should line up with each corner of the
bed lid. Secure using straps provided.
S
TEP 11
Once lid is fully open and resting against stone
guard secure in place using latch provided
S
TEP 9
Ensure the main internal air valve is open
(vertical/inline). Tighten all external air valves
on each air beam (5 on tent and 7 on annexe).
S
TEP 12
Turn the power key ON. Turn the pump master
switch ON. Push the pump button and watch
your camper inflate!
S
TEP 13
CLOSE the main internal valve to lock off air
system. You may also wish to close your cross
linking valves to retain constant pressure over
an extended stay. S
TEP 14
Initial Steps
IMPORTANT
Take care not to stand underneath the lid as it comes down.
Ensure lid is lowered slowly & does not drop suddenly.
REPEAT STEPS 1-12 IN REVERSE
TO PACK AWAY. REMEMBER
TO ZIP UP YOUR DOORS AND
WINDOWS & OPEN MAIN VALVE
BEFORE DEFLATING CAMPER.