Opus Technologies ST-DUO2, Инструкция по установке и эксплуатации

Страница: 20 / 28

ST-DUO2 | Manuel d’installation et d’utilisation | Installation and user manual | 20
4. Installation
4.1 Connecting the microphone to the
transmitter
If you want to use the headset microphone ins-
tead of the internal microphone, connect it to
the MIC INPUT jack (1).
The internal microphone is then disconnected.
If necessary, place an anti-pop windshield on
the microphone capsule. Place the earplug stir-
rup on the left ear so that the lobe support
leans back against the lobe. You can attach the
micro cord to clothes with the clip.
4.2 Connecting the receiver to the recei-
ver
To pad the earphone, it can be covered with the
foam cover: put the earphone, printed face
back, Position the cover around the earpiece
and put over the second envelope.
The
mark represents the output side of the
sound. Connect the earphone to the jack (1)
and put it on the flag of the ear.
If the sound is to be transmitted to a hearing
aid, the TR-iL induction loop (available as an
Opus Technologies accessory) can be connected
at place of the earpiece. It is placed around the
neck and transmits the sound via a magnetic
field to the hearing instruments with the T posi-
tion.
4.3 Positioning the device on the body
The transmitter / receiver can be attached to a
garment via its stirrup (5) [eg at the belt, on a
jean’s pocket] or worn around the neck: pull the
strap fastening loop via the stirrup; by moving
the button on the shoulder strap, set the desi-
red length then put the shoulder strap around
the neck. By unlocking the attachment system,
(left diagram), you can easily remove the device
and replace it with another one. Fig1
Listening receiver
Microphone transmitter for
transmitting audio