Opus Technologies DCL20-65, Инструкция по установке и эксплуатации

Страница: 23 / 30

23
4. Connections andsettings
4.1 Audioconnection
Connecting to an intercom or specific source:
Connect your source to input 2 of the DCL20.
This input supports the following sources: line,
low impedance and 100V with anadapter.
Micro input1:
Type : Jack3,5
Feature: phantom power
Input ligne 1:
Type: Terminal Block
Input type: Line or microphone, screwconnec-
tion.
Input 2:
Type: Terminal Block
Input type: Line /low impedance/ 100V withan
adapter.
4.2 Loop and powerconnection
Connect the loop cable to the "Loop" input on
the DCL20.
Power supply: Connect the power supply from
the kit to the "Power supply"input.
micro / Ligne /Mass
Ligne / Mass
Jack3,5
Note:
Loop input does not impose any sense
of connection
AC /DCconnector
5 x 2,1mm
DCL20-65 | Manuel d’installation et d’utilisation | Installation and user manual |