15. WLAN (wireless) connection only:
Your computer must have a WLAN adapter that supports Ieee 802.11 b/g.
If encryption is used, ensure each computer uses identical encryption as configured in
the ‘Installation Wizard’ (step 10).
Use the following instructions to connect your computer to the GlobeSurfer
®
III if you
are using Windows
®
XP:
For all other operating systems follow your wireless network (WLAN) connection instructions
to get connected.
a) Turn on your computer and enable the WLAN adapter.
b) From the Windows
®
‘Start’ menu, select ‘Control Panel’.
c) Click ‘Network Connections’.
d) Click ‘Wireless Network Connection’ then ‘Show Wireless Networks’. A list of available
wireless networks is displayed.
e) Select the device with the SSID you entered in the ‘Installation Wizard’ (or the default SSID)
then click ‘Connect’. If encryption is set on your GlobeSurfer
®
III a window is displayed
requesting a ‘Network Key’. Type in the password previously entered in the ‘Installation Wizard’.
f) enter the pre-shared key in both fields and click ‘Connect’.
g) Approximately one minute later the message ‘Connected’ is displayed on the GlobeSurfer
®
III
and an icon is displayed in the Windows XP notification area.
h) In the future, your computer will automatically connect to GlobeSurfer
®
III.
