16 of 49
OP940-SW
Toggles the OP725 between A B and B A directions and
updates the screen to reflect the reference values for the
appropriate direction (only in Bidirectional Mode)
Displays on-screen context help for this mode screen
Returns to page 1
Returns to the Home Screen
Front Panel Operation
IL Mode
IL mode is designed to measure insertion loss for one or two wavelengths at
one time, while allowing the user to toggle between any of the source wavelengths. It
also allows the quick referencing of both wavelengths (for example 1310nm and 1550nm)
and consecutive measuring of insertion loss on components at both wavelengths. IL
measurements will be displayed as positive values. References perfomed in this mode will
carry over to
ILRL
and
Dual ILRL
modes.
Page 2
Changes the selected wavelength for Insertion Loss
measurements (only active for Single and FTTX options)
Navigates to the IL Reference screen
Toggles between measuring one wavelength and measuring two
wavelengths at the same time. Single wavelength mode has a
faster update speed
Displays on-screen pass/fail results based on Settings defined by
the user in the Settings mode
Advances to the next page of options
Returns to the Home Screen
Page 1
IL
M
od
e
Page 1
Page 2
A B
B A
Содержание OP940-SW
Страница 52: ...www optotest com 1 805 987 1700...