4
1.3. Be within the pairing zone
When pairing the glasses for the first time, the glasses must be within pairing
range zone. Once paired with the emitter, the glasses will function within the
viewing range.
If the glasses fail to sync with last paired emitter, the glasses can be paired again
with the nearest emitter. When pairing the glasses, the glasses must be within the
pairing range zone. If the glasses do not detect the last paired emitter, the blue and
red LED will blink alternately. If sync hasn’t commenced with the emitter within 30s,
Red indicator will blink three times and then glasses with shut OFF.
1.4. Turn on the glasses
Turn on your 3D Glasses by switching the power switch to ON. The glasses will
sync with the last paired emitter (the Blue indicator on the glasses will blink twice
and then remain off. The LCD lens will blink twice and then remain on).
2.
Turn Off
Red LED blinks three times when the switch is turned off.
3.
Charging the glasses
USB Charger, computer USB port and most other USB interface can be used to
charge the glasses. While charging, the red led on the glasses will be lit. After the
charging is complete (3hrs) the indicator will automatically go off.
4.
Change Nosepiece
The 3D Glasses come with three types of interchangeable nose pieces to provide the
most comfortable fit.
